 New stainless bolt body for 700 ML in the white Got a bad bolt body? Need a new one? We make these out of the Remington over-run bodies and TIG weld new production Remington 700 stainless handles to them. So these are as close to OEM originals as you can get in stainless!!! These fit and function just fine, but aren't media blasted nor polished. They are still in the white; so you can you use them as is, or finish to your desires. Don't want the standard Remington 700 handle? You can ship us a bolt handle and we'll weld it to a bolt body and return it you.  New Stainless Steel Remington 700 ML bolt body with handle, this is what they look like before we media blast them  New handle (in the white) with BadgerRidge 209 nose pressed on Want a 209 nose pressed on? No problem. These bolt bodies come with free USPS shipping to US, AK, HI, & PR!  New stainless 700ML bolt body, media blasted, mat finish
8 Comments
josh bobee
10/30/2015 20:53:16
I like how the 209 primers are held by the bolt(700 ml).not too concerned on using different powder, using pyrodex pellets only. however what has got me curious on blow back powder getting inside the bolt. if you have the problems solved of the primer getting stuck and the powder getting inside the bolt, you definetly have me sold. Do you have any other modifications 700ml? 11/1/2015 11:08:02
The system will seal out all blow back if you do your part (use primers that seal and not overly ream the breech plug with letter C bits). It works with any Black Powder/Black Powder Substitute. For now we are focusing on 209 conversion kits, main springs, sabots, small hand tools, and replacement bolts/bolt bodies. If you need something specific please contact us and we'll see if we can help.
Tommy schwierjohann
2/18/2018 20:27:58
I have a Remington ml700 bolt and would like it put to your stainless part with 209 capability.What would my cost be?
Matt
9/18/2018 21:47:47
I'm in need of a new bolt body for my remington 700 ml. I was wondering how you sold them for. My old bolt has been converted to fire the 209 primers. Do you have to do anything special to the bolt for that?
t taylor
1/5/2019 19:00:51
I was GIVEN a 700 ml stainless, but......with a broken-off handle! how do I go about getting it put back on without buying a new bold body if ........possible?? We used to weld other handles on, and folks got out of control and un-reasonable with what they expected from us (sent in super bad bolts and thrashed parts etc). So we pulled back to keep it simple: We will weld handles on for folks that contact us, send pics, and work slow and carefully. Start by using the "contact us" page in the menu bar... might be under "More". Leave a Reply. |
Welcome to the Badger's Den!
|
RSS Feed
Orders of $50 or more ship free; low flat rate shipping to USA (US, AK, HI, PR... starting at $6.99) for orders under $50 & 1lb. $8.99 flat rate for orders over 1lb and under $50 (mailed USPS to the US, AK, HI, PR). Only specific items will be shipped to Canada. No other international shipping. See our Terms of Use for more details.
Badger Ridge Industries
PO BOX 223
Fostoria, MI 48435
(989) 795-2526
PO BOX 223
Fostoria, MI 48435
(989) 795-2526