Work in progress...   All things Austin & Halleck here.

YES!   We are working on a 209 system for the out of production, Austin & Halleck inline muzzle loaders (320/420)

IF YOU WANT UPDATES ON OUR PROGRESS PLEASE REGISTER AND CLICK THE BOX TO ALLOW US TO SEND YOU EMAILS.  WE'LL SEND AND EMAIL FOR THOSE REGISTERED TO ACCEPT EMAILS WHEN WE GET THIS CONVERSION READY FOR INITIAL TRIALS  (look at the top right window to "Log In/Register"  ... if it says "My account" you have registered and are logged in...


Click Here for Austin & Halleck Inline owner's manual 


Right now we offer A&H 320/420 replacement mainsprings (click here)

We'll be updating the pictures here as work progresses

---

Development of sealed breech 209 conversion for A&H in-lines below

Will use Savage/Lehigh Vent liner

New nose to hold 209 primer and feed it into breech plug for a seal

CAD image of 209 converted A&H inline bolt above (shown Discharged)

Roughed in for prototype, firing pin protruding out back of bolt plug will be shorter in production version... also breech plug is unfinished (need nose to set headspace and chamfer)

This is where the production system is planned to go: little protruding with counter bored access to firing pin

This is the 700 ML in action.. the idea is to replicate this functionality

IF YOU WANT UPDATES ON OUR PROGRESS PLEASE REGISTER AND CLICK THE BOX TO ALLOW US TO SEND YOU EMAILS.  WE'LL SEND AND EMAIL FOR THOSE REGISTERED TO ACCEPT EMAILS WHEN WE GET THIS CONVERSION READY FOR INITIAL TRIALS  (look at the top right window to "Log In/Register"  ... if it says "My account" you have registered and are logged in...

---

---

---

---