Badger Ridge Industries
  • Our Products
  • The Badger's Den
  • FAQ
  • 700 ML Resources
    • Installation guide for Remington 700 ML/MLS 209 Primer Conversion Kit
    • Badger Ridge Industries Remington 209 Conversion Kit Installation Service
    • Breech plug tuning
    • Firing Pin Tool
  • Ruger 77/50 Resources
  • Contact
  • About
  • Terms of Use
  • Austin & Halleck Inline
  • EULA

Remington Kit feedback from a Do-It-Yourselfer

1/25/2018

1 Comment

 
Picture
You know you have a great product (like our sealed breech 209 conversions)  when so many of your customers take the time to write such detailed, complete, messages.    Below is what Al R from Indiana had to say about our Remington 700 ML 209 conversion that he installed himself.  

For purchasing information click here, or on the pictures of the kit.

If you don't want to read his insightful  feedback, feel free to click the topics along the right side to find what you want concerning our Ruger and Remington 209 conversions (or click any of these blue links).



Good morning,

Yesterday I converted the bolt on our family-owned Remington 700ML.  My son, Matt, (who is much more computer savvy than I am) ordered it about 7 or 10 days ago.

For the sake of you knowing how much mechanical background this (very satisfied) customer has, in 1966 I was an apprentice tool-and-die guy.  Within a year or so in the apprentice program I changed career course and enrolled in engineering school, which has paid the bills for the last 50 years, until my retirement.  Over the years I accumulated a small hobby garage machine shop (drill press, vertical mill, engine lathe, shaper, welders, etc.).  I consider myself an upper-echelon, non-professional, hobbyist.  With those credentials, I hereby give a grade of “A” to Badger Ridge for your VERY complete instructions (both electronic and hard copy) and the materials kit for making a Remington 700ML 209 Bolt Conversion.

Certainly the key to doing the conversion yourself is “Tool 002”.  I’ve attached a photo of my rendition of “Tool 002” that didn’t require welding.  (It was only 10°F here yesterday in central Indiana, and I didn’t want to have the shop doors open to do the welding). 

The B/M for my “Tool 002” is:
   (1) short piece of angle or barstock
   (2) #10 ViseGrip pliers
   (2) ½-13 nuts (while square is best, heavy hex would be ok, and standard nuts would work)
   (1) ½-13 hex head cap screw, drilled to accept firing pin

Picture
Al's improvised bolt tool is pictured above and below (aka "Tool OO2")
Picture
The other suggestion I have is to recommend that when tapping the cross pin (out and in) the instructions need to prescribe support, or it will bounce, (and eventually bend), I suppose.  I used a machinist V-block, but anything could be shimmed up and made to work.
 
As to tuning the breech plug, Fiocchi 209 primers will not fit in my rifle without tuning. 
 
I can’t wait to get the scope mounted and some Blackhorn powder and take the gun to the range, once it warms up.
 
On a larger picture, projects like 209 Conversions make America stronger, as DIY people who do these types of projects are problem solvers that extends way beyond a single 209 Bolt Conversion.  I’m a strong believer in “Made in America”.  I’m glad to see that you’re doing your part.
 
Best wishes to Badger Ridge for 2018, and keep up the good work!!

Sincerely,

Al 


Al,

Thanks for the kind words, encouragement, and insight on an easy way to improvise a firing pin tool.  

As for the cross pin removal:  I like to use the pipe nipple with the welded nut bolt tool on 700ML's... it holds it all very well, and holds best when clamped in my vice.   Makes tapping the pin out a breeze.   With this tool I've had little trouble removing all but the most stubborn cross pins.    If the pin doesn't want to budge, usually trying from the other side is all it takes.  However for the really stuck ones, I do place the cocking piece on the anvil of my vice, or in a V block and use hard strikes to remove the pin. 

Picture
My favorite firing pin tool above.. (Aka Tool 002)
When putting it all back together, using the roll pin we include with the kit (and de-burring the pin with a little light filing) usually requires little undue force.   I tend to use the tool I welded up quick (two nuts welded to small angle... similar to the one you shared) when I work on un-threaded cocking piece firing pins that have to have solid dowel pins...  and with solid dowl pins, I pre drill 3/32, then disassemble & chase each hole individually with a #41 drill bit.   This way the solid dowel pin floats into place (so there is little friction on the pin requiring hard strikes).  

As for primer recommendations: Yes,  Fiocchi and other European 209 primers are typically fatter than US primers.  (I used recommend standard CCI but now that CCI changed their dimensions and color [now they are silver] I cannot recommend them, and instead suggest Federal or Remington primers).   With most of these you will probably have to tune.

Remember if a primer sticks in the nose, a dry fire usually will loosen it.

Thanks again for writing in and allowing me to share your message with everyone,

Tom
1 Comment

Customer Feedback on our Ruger 77/50 209 conversion

1/21/2018

0 Comments

 
Always love to hear from our customers.   Here is what Craig G from Massachusetts had to say about the Ruger 77/50 209 bolt & breech plug he bought from us:
Picture
Converted Ruger 77/50 bolt with all the accessories above.

Hi, Tom,

I just wanted to let you know that I’m very happy with the Ruger 77/50 bolt and breech plug that I bought recently. They arrived fast and the fit and finish is as good if not better then original. Thank you. Job well done.


You should be proud of the product and service you provide. 

Thanks again,

​Craig

Thank you for taking the time to write us!   We appreciate the kind words and positive feed back.   We are proud of our products and the services we render.   We are also proud of our great customers!    God has blessed us!
Picture
Want more information on our Ruger 77/50 209 Conversion kit?   Start here or use the categories listed on the right side of this blog.
Picture
0 Comments

Successful Satisfied Customer Sends a Quick Note

1/4/2018

0 Comments

 
Picture
Steve P from Lake Orion, Michigan was so pleased with his Remington 700 ML 209 Conversion he took the time to send us the picture above via Facebook.    Here's what he had to say (short, sweet, and to the point):

130 yard shot, 120gr by volume of Black Horn 209, Parker Ballistic Extreme 300gr and the Badger Ridge bolt upgrade, Timney trigger.

Wow!  Nice Buck!  Well Done!
0 Comments

    Welcome to the Badger's Den!
    Where Badger Ridge Products are discussed.

    I constantly add to and update this blog's content.

    Not finding what you wanted?
    ​-Check out the "Archives", "Categories", or the menu bar.

    ​

    Written by:

    Tom, purveyor of fine products.

    Badger Ridge Industries Logo
    TM

    Archives

    March 2022
    December 2021
    September 2021
    July 2021
    February 2021
    January 2021
    September 2020
    April 2020
    January 2020
    October 2019
    September 2019
    May 2019
    January 2019
    November 2018
    July 2018
    May 2018
    April 2018
    February 2018
    January 2018
    November 2017
    October 2017
    August 2017
    July 2017
    April 2017
    February 2017
    January 2017
    November 2016
    October 2016
    September 2016
    August 2016
    July 2016
    June 2016
    May 2016
    December 2015
    November 2015
    October 2015
    September 2015
    August 2015
    May 2015
    April 2015

    Categories

    All
    AR Stuff
    Blackhorn 209
    Customer Feedback
    Maintenance
    Organization
    Remington 700 ML/MLS
    Ruger 77/50
    Savage Muzzleloader
    Troubleshooting

    RSS Feed


Orders over $100 ship free.   Low flat rate shipping to USA (US, AK, HI, PR)  starting at $7.49 for orders under $100 & 1lb.  $10.49 flat rate for orders over 1lb & under 2.5lb, bulky or over 2.5lb are $15.99 (mailed USPS to the US, AK, HI, PR).   Only specific items will be shipped to Canada (shipping to Canada calculated at check out).  No other international shipping.    See our Terms of Use for more details.

    

  Badger Ridge Industries
PO BOX 223
Fostoria, MI 48435

​(989) 795-2526


Please refrain from calling outside of the hours of 9am-8pm Eastern
If you do call outside business hours, the phone system will only offer you automated assistance or to leave a voicemail

Feel free to use the contact form to get a hold of us!
Se Habla Español
  • Our Products
  • The Badger's Den
  • FAQ
  • 700 ML Resources
    • Installation guide for Remington 700 ML/MLS 209 Primer Conversion Kit
    • Badger Ridge Industries Remington 209 Conversion Kit Installation Service
    • Breech plug tuning
    • Firing Pin Tool
  • Ruger 77/50 Resources
  • Contact
  • About
  • Terms of Use
  • Austin & Halleck Inline
  • EULA