If you are looking for a great gift to a Remington 700 ML or Ruger 77/50 owner, look no further. Unless they hunt in Oregon, or Idaho (the last two hold outs that don't allow sealed breech 209's), our sealed breech 209 conversion kits are the best thing they could ever have on their rifles! And if they hunt in Oregon/Idaho you could send me their bolt and I'll deep clean it and change the Remington's mainspring. Or I can build an entire new bolt so that they can switch back and forth between the original system and our system. So we have y'all covered too! You may wonder how it works. You can think of having three basic options: Option 1: Buying a DIY kitYou can buy a Remington 700 ML kit as a gift to be installed by the owner or their gunsmith. (option 1) This is your least expensive option. Note, that there is not an "Option 1" for a Ruger as the Ruger's conversion is too complicated. Option 2: Send us the bolt and pay us to convert itYou can purchase our Remington kit, add installation before you check out, and then ship us the bolt. Lets call this option 2. It's in the middle of cost, but very simple as you just have to ship us the bolt, we convert it and send it back. The costs differ but this option is basically the same between the Remington 700 ML and the Ruger 77/50. When it comes to option 2: you send us the bolt, it's converted, then shipped back with the new breech plug/vent liner and other small tools. Of course with the Ruger 77/50, there is no option one. Option 3: Buy a new bolt we build from scratchOption 3 is the most expensive option: buy an already converted bolt with a breech plug. I only recommend option 3 when people hunt in Idaho, or Oregon for some hunts where they have to use exposed caps, but have other hunts where they can seal the breech and use 209's. This option is also viable for folks who have rifles that are missing bolts. We can build bolts for both the Remington 700 ML/MLS and the Ruger 77/50. If you have questions, you probably can find an answer in our FAQ, or within the archives along the right side of these Badger's Den posts. If you aren't finding what you need, you can use the Contact page by clicking here (or under "More" in the banner above) to initiate a conversation. We'll reply with an email answering your question along with our phone number (Sorry but we have to use the contact page to screen telemarketers and scammers). So please take a look at the FAQ before you use the contact form: we'll reply with an email and phone number so you can chat with us. Remember you can always add what you want to your chart, and complete an online check out. Hope this helps and you have a wonderful Christmas & Happy Holidays!
0 Comments
Your comment will be posted after it is approved.
Leave a Reply. |
Welcome to the Badger's Den!
|
|
Written by:Tom, purveyor of fine products. |
Archives
October 2024
August 2024
March 2024
August 2023
June 2023
March 2022
December 2021
September 2021
February 2021
January 2021
September 2020
April 2020
January 2020
October 2019
September 2019
May 2019
January 2019
November 2018
July 2018
May 2018
April 2018
February 2018
January 2018
November 2017
October 2017
August 2017
July 2017
April 2017
February 2017
January 2017
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
December 2015
November 2015
October 2015
September 2015
August 2015
May 2015
April 2015
Categories
All
AR Stuff
Blackhorn 209
Customer Feedback
Hunting Gear & Accessories
Maintenance
Organization
Remington 700 ML/MLS
Ruger 77/50
Savage Muzzleloader
Troubleshooting