THESE ARE SOLID 3D PRINTED PLASTIC!
Beware there are other "5-9" foam barrel resets out there.
We have tons of customers who are tired of the poor performance of foam and are switching to our solid plastic barrel rests.
Our 5-9Stlye© rests have improvements that allow them to better hold shotguns with a ribbed barrel. Badger Ridge's also can be face screwed into a backer/wall behind, or mounted to thin sheet metal gun cabinets. Mounting to sheet metal cabinets is easily accomplished by drilling a couple holes through the cabinet, and running #8 self drilling sheet metal screws from the outside and directly into the plastic barrel rest (see our STACK-ON style barrel rests for more details on that method of mounting). Double sided sticky tape, or adhesive magnets also will work fine with these if you are so inclined.
Beware we don't send any screws, tape, or magnets with these. You are purchasing just the hard plastic rest.
These rests are fast becoming favorites of guys building racks for gun clubs and trap/skeet ranges.
We have tons of customers who are tired of the poor performance of foam and are switching to our solid plastic barrel rests.
Our 5-9Stlye© rests have improvements that allow them to better hold shotguns with a ribbed barrel. Badger Ridge's also can be face screwed into a backer/wall behind, or mounted to thin sheet metal gun cabinets. Mounting to sheet metal cabinets is easily accomplished by drilling a couple holes through the cabinet, and running #8 self drilling sheet metal screws from the outside and directly into the plastic barrel rest (see our STACK-ON style barrel rests for more details on that method of mounting). Double sided sticky tape, or adhesive magnets also will work fine with these if you are so inclined.
Beware we don't send any screws, tape, or magnets with these. You are purchasing just the hard plastic rest.
These rests are fast becoming favorites of guys building racks for gun clubs and trap/skeet ranges.
Face mounting option, of a 3U shown above
Above: 3U hard plastic 5-9Style© barrel rest
These rests are defined by their number of 'U's. For clarity, most pics here illustrate a 3U. All our 5-9 rests have U's that are that are spaced 3.5 inches apart. They accommodate most non-scoped rifles, shotguns (single, double, and over-under). Each main U has a 1" wide notch between them that accommodates raised sight/scoped firearms. All are 1 5/8inches tall, and protrude from the wall 3" (see graphic for more details on dimensions).
The length varies with the number of 3.5 inch wide U's
2U -> 7 inches wide
3U -> 10.5 inches wide
4U -> 14 inches wide
2U -> 7 inches wide
3U -> 10.5 inches wide
4U -> 14 inches wide
3U rest shown above in plan and profile view
If multiple 5-9Style© rests are mounted end to end, the notches in each end will form another raised sight/scope rest between them.
Where rests are butted together they will form another raised sight rest area
One of our customers was so pleased he sent us this picture of what he built for his trap & skeet range
To make a purchase: select the number of U's, then the quantity, & then click "add to your cart." Keep adding until you have everything you need in your cart and then check out. It will take approximately one business day per item to print it. We'll ship your entire order when it is complete.
We print in PETG (strong and food safe plastic). FYI water bottles are made out of PET. (PETG is PET that is modified to work in a 3D printer). It can take hot rides in cars, and such, but I wouldn't lean a hot barrel nor hot suppressor against it.
These will be made in grey. We try to keep our shades of grey consistent, but sometimes we have to print in whatever is available. You can make suggestions and request in the 'Note to Seller' portion of your check out, but realistically we'll probably ignore color requests and ship what ever combination of color we have.
We print in PETG (strong and food safe plastic). FYI water bottles are made out of PET. (PETG is PET that is modified to work in a 3D printer). It can take hot rides in cars, and such, but I wouldn't lean a hot barrel nor hot suppressor against it.
These will be made in grey. We try to keep our shades of grey consistent, but sometimes we have to print in whatever is available. You can make suggestions and request in the 'Note to Seller' portion of your check out, but realistically we'll probably ignore color requests and ship what ever combination of color we have.
We will ship these, and all our 3D printed items (and more!) to Canada