Licensed STL's so you can 3D print our organizers for STACK-ON gun cabinets
Have a STACK ON Gun Cabinet? Want to use the door for extra storage? Need more barrel spacers and scope standoffs? We can help! If the door has a ~8.5 inch gap between the folded metal jam and the Hat track reinforcement (see the picture below) our organizers should fit. The gap should be just a little under or over 8.5". BE SURE TO READ AND UNDERSTAND THE EULA (these designs are for personal use and may not be produced for others nor sold)!
|
The STL's are designed to fit the standard STACK-ON door above (about 8.5" between the stiffener inside the door and the hinge jamb)
|
3D printed door trays with 4 shell holders shown above
What is accessible per the EULA? Every STL file we made for the project!
Barrel Spacers
Scope Standoff
Door storage items:
--Hole Locator tool
--2 styles of Door Trays (regular and extra deep)
--Pistol holders (1911, 9-40 Poly, scoped revolver, revolver, S&W shield, Ruger Mk1, etc)
--Ammunition holders (12 Ga, 20ga, 410/45LC, & 44Mag)
--Magazine holders (9-40, 1911, & Pmag)
You can read more about this in the Badger's Den: Click here to read the article I wrote about these!
The door organizers do require some rivets, washers, and holes to be located, drilled, and de-burred to install them.
Want to see the installation instructions? Click here!
Don't want to print, them? That's fine, we can do that for you, just click here to shop for printed versions!
Barrel Spacers
Scope Standoff
Door storage items:
--Hole Locator tool
--2 styles of Door Trays (regular and extra deep)
--Pistol holders (1911, 9-40 Poly, scoped revolver, revolver, S&W shield, Ruger Mk1, etc)
--Ammunition holders (12 Ga, 20ga, 410/45LC, & 44Mag)
--Magazine holders (9-40, 1911, & Pmag)
You can read more about this in the Badger's Den: Click here to read the article I wrote about these!
The door organizers do require some rivets, washers, and holes to be located, drilled, and de-burred to install them.
Want to see the installation instructions? Click here!
Don't want to print, them? That's fine, we can do that for you, just click here to shop for printed versions!
Up-close of 9-40 Poly Pistol holder, with 3 mags and other Trays and shell holders
|
1911 Pistol Holder with 2 of 3 mag slots filled
|
Just a few of the 3D printed STL's for STACK-ON gun cabinets... there is more!
3D Printed Badger Ridge Barrel Spacer (files for single, 2, 3, 4, & 5U in the zip file), Plus Scope Standoff (3D printed items in Orange, original STACK-ON item in black)
Ruger MkII holder above
THIS LISTING (FOR SALE) IS A PERSONAL USE LICENSE TO DOWN LOAD AND PRINT SPECIFIC STL FILES OWNED BY BADGER RIDGE LLC. IT IS GOVERNED BY OUR EULA. DO NOT ADD TO YOUR CART, NOR PURCHASE THIS ITEM UNTIL YOU HAVE READ AND AGREE TO OUR EULA.
Once you have made your license purchase you will have 30 day's complete a download of a single ZIP file containing all of our STL files and other documentation. The EULA doesn't allow the resale, distribution, modification, sharing, nor printing for others, nor printing for sale of these files nor the items they represent.
Once you have made your license purchase you will have 30 day's complete a download of a single ZIP file containing all of our STL files and other documentation. The EULA doesn't allow the resale, distribution, modification, sharing, nor printing for others, nor printing for sale of these files nor the items they represent.