1 Inch Aluminum Spacer Tube - C Cell Add on Item
Additional Details
This light weight tube is very useful to create chambers inside C cell solvent traps that allow patches to be separated from solvent. This tube is a bit undersized for use in most C Cell tubes, and may require the ends to be flared or some tape wrapped around it to aid in reducing rattling.
These are cut either with a band saw or with a tubing cutter and will typically have rough, burred ends. Lengths are approximate to about +/- .2 inches. The aluminum is soft and the burs easily removed, and ends squared with some light sanding or filing.
- Maximum Outside Diameter (In): ~1.0 Inch
- Wall Thickness (In): ~ .06 Inch
This light weight tube is very useful to create chambers inside C cell solvent traps that allow patches to be separated from solvent. This tube is a bit undersized for use in most C Cell tubes, and may require the ends to be flared or some tape wrapped around it to aid in reducing rattling.
These are cut either with a band saw or with a tubing cutter and will typically have rough, burred ends. Lengths are approximate to about +/- .2 inches. The aluminum is soft and the burs easily removed, and ends squared with some light sanding or filing.