Badger Ridge Industries
  • Our Products
  • The Badger's Den
  • FAQ
  • 700 ML Resources
    • Installation guide for Remington 700 ML/MLS 209 Primer Conversion Kit
    • Remington 209 Conversion Kit Installation Service
    • Breech plug tuning
    • Firing Pin Tool
  • Ruger 77/50 Resources
  • Contact
  • About
  • Terms of Use
  • Austin & Halleck Inline
  • EULA
  • Our Products
  • >
  • GO TO OUR NEW WEBSITE: Badger-Ridge.com
  • >
  • Muzzle-Loader
  • >
  • Remington 700ML-MLS Muzzle-Loader
  • >
  • Remington 700ML/Model 7 Main Spring - F15411 equivalent

Remington 700ML/Model 7 Main Spring - F15411 equivalent

SKU: EQF15411MainSpring
$10.00
$6.99
$6.99
On Sale
Unavailable
per item
Mainspring for Remington 700ML & Model 7 is only available at our new website: Badger-Ridge.comĀ  please click here to go there and make your purchase
  • Facebook
  • Twitter
  • Pinterest
  • Google+
Sold out
Add to Cart

Main Spring for Remington 700ML/MLS & Model 7 (equivalent to F15411) is only available for sale at our new website: Badger-Ridge.com   Please click here to go there and make your purchase.

These springs are made specially for us, in the USA, & from US materials.   These springs are subjected to a rigorous production and QA regime in the US:   They are wound, ends closed and ground, set, treated, and oil dipped by US craftsmen who do QA steps at each point of the production process. 

​​​A must have when converting a Remington 700 ML/MLS to 209 primers as the original system subjected the mainspring to lots of heat, extra cycles, and corrosive blow-back.   Its a rare day that I work on a bolt running a leaky system that doesn't have a worn out and corroded mainspring. 

This is the spring that forces the  pin forward to strike the primer in the Remington 700 ML/MLS rifle; it is installed inside the bolt body, around the pin.

This spring also fits the Model 7 rifle.   We use these in our first generation 209 conversions for the Remington 700MLS (see picture below for more information).  These springs are made in the USA out of US sourced materials.

If you don't want to install this spring your self, we can do it for you.   Click here to read more about our mainspring replacement service.
Picture
The spring for sale here is our replacement for the F15411 (Far left). Fits Model 7, 700 ML/MLS

Orders over $100 ship free.   Low flat rate shipping to USA (US, AK, HI, PR)  starting at $7.49 for orders under $100 & 1lb.  $10.99 flat rate for orders over 1lb & under 2.5lb, bulky or over 2.5lb to 5lb are $15.99, 5 lb and over are $21.99 (mailed USPS to the US, AK, HI, PR).   Only specific items will be shipped to Canada (shipping to Canada calculated at check out).  No other international shipping.    See our Terms of Use for more details.

    

  Badger Ridge Industries
PO BOX 223
Fostoria, MI 48435

​(989) 795-2526
OUR SERVICE PROVIDER (TDS TELECOM) IS CONTINUALLY MESSING UP OUR PHONE!   If you have trouble getting through, please leave a voicemail letting us know and then use the CONTACT FORM  or EMAIL US.

Outside of the hours of 8am-9pm Eastern our phone system will only offer you automated assistance or to leave a voicemail

Feel free to use the contact form to get a hold of us!
Se Habla Español
  • Our Products
  • The Badger's Den
  • FAQ
  • 700 ML Resources
    • Installation guide for Remington 700 ML/MLS 209 Primer Conversion Kit
    • Remington 209 Conversion Kit Installation Service
    • Breech plug tuning
    • Firing Pin Tool
  • Ruger 77/50 Resources
  • Contact
  • About
  • Terms of Use
  • Austin & Halleck Inline
  • EULA