Back in stock, but for a very limited time
Found one box of these tucked away. When they are gone, they are gone.
(Sealed Power Discontinued this item... and we are working on a USA made stainless steal replacement. We'll list it here when its available. In the mean time YOU MAY WANT TO TRY OUR D cell SPACER PIPE as a substitute.
This is an ADD ON ITEM. Add on item's do not ship for free, but can be added to any item already shipping for no additional shipping cost. Or you can purchase Add On Item Shipping. See our Terms of Use for more details.
(Sealed Power Discontinued this item... and we are working on a USA made stainless steal replacement. We'll list it here when its available. In the mean time YOU MAY WANT TO TRY OUR D cell SPACER PIPE as a substitute.
This is an ADD ON ITEM. Add on item's do not ship for free, but can be added to any item already shipping for no additional shipping cost. Or you can purchase Add On Item Shipping. See our Terms of Use for more details.
Valve Spring tech data
- Free Height (In): 1.540 Inch
- Free Height (mm): 39.116mm
- Maximum Outside Diameter (In): 1.350 Inch
- Maximum Outside Diameter (mm): 34.29mm
- Minimum Closed Height (In): 1.300 Inch
- Minimum Closed Height (mm): 33.02mm
- Minimum Inside Diameter (In): 0.984 Inch
- Minimum Inside Diameter (mm): 24.994mm
- Minimum Open Height (In): 0.910 Inch
- Minimum Open Height (mm): 23.114mm
- Number Of Coils: 4.9
- Outside Diameter (In): 1.350 Inch
- Solid Height (In): 0.870 Inch
- Solid Height (mm): 22.098mm
- Type: Single
- Wire Diameter (In): 0.175 Inch
- Wire Diameter (mm): 4.445mm
Useful to keep plugs under compression and stop rattling in D cell solvent traps. Made in USA. Typically placed closest to the muzzle of the firearm.
Orders of $50 or more ship free; low flat rate shipping (starting at $6.99) for orders under $50 & 1lb (mailed USPS to the US, AK, HI, PR). See our Terms of Use for more details.
Of course this is an automotive part with automotive use (as a spring for engine valves) Our stainless replacement will have a slightly lower spring rate (min and maximum hold open values will be lower).