VersaMax Repair Parts
SKU:
$115.00
$9.00 - $100.00
$100.00
On Sale
per item
THESE ITEMS ARE AVAILABLE AT OUR NEW WEBSITE Badger-Ridge.com
Sold out
THESE ITEMS ARE AVAILABLE AT OUR NEW WEBSITE Badger-Ridge.com
Fix your VersaMax by upgrading these common failure parts with Benelli parts
Our "Remelli" Parts Kit for Remington VersaMax shot guns contains:
- Replacement Benelli Cam pin
- Replacement Benelli Hammer
- Replacement Benelli Hammer Spring
- Replacement Benelli Hammer Spring Plunger/Cap
If you want to DIY just select and purchase the "Remelli Parts Kit" (we'll ship you the parts)
If you want us to put the parts into your shotgun's trigger assembly: just add the "Remelli Parts Kit", then click add to cart, then add "Send us your trigger Pack for upgrade - (Labor Only)" to your cart before you check out. Remove and send us just your VersaMax's trigger pack (we'll hold on to the parts you purchased, await your trigger pack's arrival, swap the parts, & then return the trigger pack to you with all the extra parts).
- Replacement Benelli Cam pin
- Replacement Benelli Hammer
- Replacement Benelli Hammer Spring
- Replacement Benelli Hammer Spring Plunger/Cap
If you want to DIY just select and purchase the "Remelli Parts Kit" (we'll ship you the parts)
If you want us to put the parts into your shotgun's trigger assembly: just add the "Remelli Parts Kit", then click add to cart, then add "Send us your trigger Pack for upgrade - (Labor Only)" to your cart before you check out. Remove and send us just your VersaMax's trigger pack (we'll hold on to the parts you purchased, await your trigger pack's arrival, swap the parts, & then return the trigger pack to you with all the extra parts).
Remington Original Versamax action spring (F401305)
If you are having light primer strikes, its always best to clean everything and inspect the parts. That would include the action spring (Typically this is omitted from service/cleaning by most as it isn't mentioned in the owner's manual). Remember to use appropriate gun oils/high quality lubes that do not gel when cold (for hunting guns). Competition guns sometimes can get away with thicker lubes if they won't be fired in cold conditions.
Most often just installing our "Remelli kit" and cleaning the action spring fixes light strikes, if it doesn't or you just want to be overly thorough, replacing the action spring is the 3rd item to check off (after replacing the cam pin {#1} and the hammer/spring/plunger {#2}). We offer Remington original action springs (F401305).
We cannot replace the action spring for you. Use the owner's manual's procedures to unload, make safe, remove the barrel, bolt assembly, and trigger assembly, then remove the butt-pad, then remove the buttstock with a 3/16 hex drive in order to access the recoil spring tube. The recoil spring & plunger are retained in the tube by a 19MM (3/4") retaining nut. Be careful! The 19mm nut is under spring tension! Remove clean, and replace as desired.
Most often just installing our "Remelli kit" and cleaning the action spring fixes light strikes, if it doesn't or you just want to be overly thorough, replacing the action spring is the 3rd item to check off (after replacing the cam pin {#1} and the hammer/spring/plunger {#2}). We offer Remington original action springs (F401305).
We cannot replace the action spring for you. Use the owner's manual's procedures to unload, make safe, remove the barrel, bolt assembly, and trigger assembly, then remove the butt-pad, then remove the buttstock with a 3/16 hex drive in order to access the recoil spring tube. The recoil spring & plunger are retained in the tube by a 19MM (3/4") retaining nut. Be careful! The 19mm nut is under spring tension! Remove clean, and replace as desired.
"D" AKA "C" clip that retains the hammer pivot pin on Autoloader trigger packs
If you want a replacement, or just want one to keep on hand, for that little hard to find bugger we sell them here.
These tiny little guys are sometimes called C clips, but to me they are really "D" clips.
Whatever you call them, the one we offer here will fit most Benelli's, the Remington VersaMax, and may other autoloading shotguns (like a bunch of Stoegers).
These tiny little guys are sometimes called C clips, but to me they are really "D" clips.
Whatever you call them, the one we offer here will fit most Benelli's, the Remington VersaMax, and may other autoloading shotguns (like a bunch of Stoegers).
To remove the action spring, remove the buttstock to expose the action tube, then remove the 19mm retainer on the end of the action spring tube
Remington VersaMax Shotguns (note the "Sportsmen" version doesn't have the grey/black rubber inlays)
More details about why these parts are needed and how our trigger pack upgrade service works
The Remington VersaMax is at it's heart, a USA made clone of the Benelli M4, with a wing-shooting stock, an improved gas system, and other changes. Some (but not all) of the VersaMax's parts are interchangeable with multiple Benelli parts. Unfortunately some of the key Remington original parts don't seem to last and can cause malfunctions. Typically the first sort of malfunction to pop-up is a Failure to Fire (light primer strikes).
The Benelli parts we sell are direct, higher quality replacements for the 4 pieces that (individually or together) fail first to cause light primer strikes (aka Failure to Fire) in the VersaMax. Whether a VersaMax has all 4 bad at the moment or not, it is recommended to upgrade all 4 to Benelli parts to ensure reliability (ie if you think your hammer is ok, just replace it now, before it isn't and costs you). You can try just replacing these 4 before moving on to the action spring, or replacing the action spring as well.
The Benelli parts we sell are direct, higher quality replacements for the 4 pieces that (individually or together) fail first to cause light primer strikes (aka Failure to Fire) in the VersaMax. Whether a VersaMax has all 4 bad at the moment or not, it is recommended to upgrade all 4 to Benelli parts to ensure reliability (ie if you think your hammer is ok, just replace it now, before it isn't and costs you). You can try just replacing these 4 before moving on to the action spring, or replacing the action spring as well.
The Repair Service is simple:
-Select the bubble by Remelli Parts kit & then click "add to your cart"
-Select the bubble by Send Us your Trigger Pack for upgrade (Labor Only) & then click "add to your cart"
-Complete a check out (and get us paid)
-Pull the Trigger Assembly from your VersaMax, pad it well, & ship it to us (if we see you purchased the installation service we'll hold the parts and other items you purchased and will ship them with your upgraded trigger pack). Give us 4-8 weeks to turn your trigger pack around.
What you are buying with our Repair Service: We'll pull the hammer/plunger/spring clean and replace them with new Benelli manufactured M4 parts (and throw the old parts in the recycling bin... unless you put a note in telling us you want them back).
The New Cam Pin (and anything else you purchase like an action spring) will be shipped to you with the upgraded trigger pack (the cam pin is replaced just by pulling the bolt apart with the procedures in the owner's manual).
Again, if you want your old parts back, let us know with a note accompanying the trigger pack (or they'll just end up in my recycling bin). Expect 4-8 weeks turn around (from when your item hits my hands until it's complete and back in the mail).
-Select the bubble by Remelli Parts kit & then click "add to your cart"
-Select the bubble by Send Us your Trigger Pack for upgrade (Labor Only) & then click "add to your cart"
-Complete a check out (and get us paid)
-Pull the Trigger Assembly from your VersaMax, pad it well, & ship it to us (if we see you purchased the installation service we'll hold the parts and other items you purchased and will ship them with your upgraded trigger pack). Give us 4-8 weeks to turn your trigger pack around.
What you are buying with our Repair Service: We'll pull the hammer/plunger/spring clean and replace them with new Benelli manufactured M4 parts (and throw the old parts in the recycling bin... unless you put a note in telling us you want them back).
The New Cam Pin (and anything else you purchase like an action spring) will be shipped to you with the upgraded trigger pack (the cam pin is replaced just by pulling the bolt apart with the procedures in the owner's manual).
Again, if you want your old parts back, let us know with a note accompanying the trigger pack (or they'll just end up in my recycling bin). Expect 4-8 weeks turn around (from when your item hits my hands until it's complete and back in the mail).
I've personally seen two VersaMax's with light primer strikes at the same time on the same waterfowl hunt, because they had bad hammers, springs, plungers, and cam pins. Both guns had over 500 shells through them... one was close to 1500 shells, the other about half that. The "Remelli Kit" plus a good cleaning of the action spring, plunger, and tube was the fix.
Remember a little light grease (when its hot out) or a lot of high quality oil (for hunting situations) is required on the cam pin to prevent galling & deformation (even on the higher quality Benelli pin we sell here). And on top of cleaning and lubing the trigger pack, you should remove, clean, and lightly lube the action spring very often to prevent it from gumming up in the cold.
Feel free to read more about this here on our blog: Versa-Max light primer strikes and the fix
Remember a little light grease (when its hot out) or a lot of high quality oil (for hunting situations) is required on the cam pin to prevent galling & deformation (even on the higher quality Benelli pin we sell here). And on top of cleaning and lubing the trigger pack, you should remove, clean, and lightly lube the action spring very often to prevent it from gumming up in the cold.
Feel free to read more about this here on our blog: Versa-Max light primer strikes and the fix