RYOBI 18V tool & battery organizers
SKU:
$5.99
$4.99
$4.99
On Sale
per item
Sold out
THESE ARE AVAILABLE AT OUR NEW WEBSITE Badger-Ridge.com
ORGANIZERS that hold Ryobi 18V Tools & Batteries
These organizers are great to give tools and batteries a highly visible easily access home. An organized shop is more productive. These organizers screw to horizontal or vertical surfaces (screws not included).
The tool holder will hold most Ryobi tools. The only RYOBI 18V tools I have that are not compatible are my circular saws, saws-all, and nail guns. My drills, impact drivers, and multi-tool fit just fine.
The tool holder will hold most Ryobi tools. The only RYOBI 18V tools I have that are not compatible are my circular saws, saws-all, and nail guns. My drills, impact drivers, and multi-tool fit just fine.
Tool & battery holder for Ryobi 18V tools above
Tools, chargers, and batteries are show to illustrate use of the organizers and are not for sale!
To mount we recommend flat or domed head screws, and setting the drill to a low torque setting to prevent cracking the plastic mount.
The battery holder will easily mount work with 1 1/4 inch screws, the tool holder needs 2 inch screws. Recommend placing a backer board on sheet rock (backer screwed to studs) then screwing the holders to the backer board. On OSB I just mount them directly wherever I desire. Screws are not provided.
We print in PETG (strong and food safe plastic). FYI water bottles are made out of PET. (PETG is PET that is modified to work in a 3D printer). PETG will take "hot dash board of car" sort of heat, but won't take "burn you and leave a blister" sort of heat without melting nor deforming.
PLEASE REMEMBER: It will take at least one business day per item to print. We'll ship your entire order when it is complete.
To simplify production we will only make these in shades of grey. Typically these are made in light grey like you see in the pictures. But we may need to print in another color.
The battery holder will easily mount work with 1 1/4 inch screws, the tool holder needs 2 inch screws. Recommend placing a backer board on sheet rock (backer screwed to studs) then screwing the holders to the backer board. On OSB I just mount them directly wherever I desire. Screws are not provided.
We print in PETG (strong and food safe plastic). FYI water bottles are made out of PET. (PETG is PET that is modified to work in a 3D printer). PETG will take "hot dash board of car" sort of heat, but won't take "burn you and leave a blister" sort of heat without melting nor deforming.
PLEASE REMEMBER: It will take at least one business day per item to print. We'll ship your entire order when it is complete.
To simplify production we will only make these in shades of grey. Typically these are made in light grey like you see in the pictures. But we may need to print in another color.