Neck Sizing Washer - Add on item
SKU:
$6.99
$2.85 - $3.99
$3.99
On Sale
per item
Place this washer on top of your reloading press in order to set a consistent lift to your full length die. Lets one use any full length die to neck size. Select the washer that gives you the desired lift (.095" or .157"). Add on Item (must pay for shipping, or add it to an order that qualifies for free shipping)
Neck Sizing Cheater Washer
Using this washer allows one to neck size with a full length die. The full length die is set to properly full length size, and when one wants to only neck size the neck sizing washer is placed between the press and the die to raise the die the thickness of the washer. This allows the old primer to be pressed out, and only the neck to be sized. The washer does not let the die engage the shoulder or the neck close to the shoulder. The rest of the neck by the case mouth is re-sized to give the proper tension to hold the bullet. No need to buy a neck sizing die for each caliber. One sizing washer can save you hundreds of dollars.