Badger Ridge Industires
  • Our Products
  • The Badger's Den
  • FAQ
  • 700 ML Resources
    • Installation guide for Remington 700 ML/MLS 209 Primer Conversion Kit
    • Badger Ridge Industries Remington 209 Conversion Kit Installation Service
    • Breech plug tuning
    • Firing Pin Tool
  • Ruger 77/50 Resources
  • Contact
  • About
  • Terms of Use
  • Austin & Halleck Inline
  • EULA

If you purchase Remington 209 Kit "Installation" these are the terms:

You can purchase installation for any Remington 700 ML/MLS 209 kit by adding the "Installation Service" to your cart, along with the kit you need installed.   Then complete checking out, & mail us only your rifle's bolt.  The address to mail the bolt to will be emailed to you on your receipt.  

We hold the entire order until we receive your bolt.    Once we complete the modification, we'll ship your bolt back with the accompanying accessories (Badger Ridge Hunter Breech plug, Lehigh vent liner, hex L wrench and letter C drill bit... if you purchased an entire kit, and everything else in that order). You may need to tune the breech plug a little yourself upon receipt depending on your choice of primers. Turn around from when we receive your bolt to when its back in the mail is typically under a week, execpt when we post in our TERMS of USE that we have some sort of delay going on.

BE ADVISED: INSTALLATION SERVICE WILL BE DELAYED THE ENTIRE MONTH OF JULY 2019

​
Be sure to input your email and phone during check-out so that we can keep you informed of your bolt's status. We will send emails when we ship your bolt back. We provide USPS tracking numbers when shipping.

If your bolt it is badly corroded we'll still tear down and clean. Some times it can take days of soaking for solvent to break down the crud on badly corroded bolts. Once we have a good idea of what you'll need we'll call you and discuss our options. This is typically only required when the bolt was neglected after firing. If the bolt isn't salvageable, and we can't work out a plan over the phone, we'll refund all but $25 (
return postage and a trouble shooting fee).  So far, we've always been able to work it out and get a functioning bolt in our clients' hands.

We don't return the pieces we take out unless a client specifically requests they be returned in the note to seller portion of the check out.


Click here to Purchase the Remington 700 ML 209 Conversion Kit

Badger Ridge Industries
PO BOX 223
Fostoria, MI 48435

​(989) 795-2526

    

  • Our Products
  • The Badger's Den
  • FAQ
  • 700 ML Resources
    • Installation guide for Remington 700 ML/MLS 209 Primer Conversion Kit
    • Badger Ridge Industries Remington 209 Conversion Kit Installation Service
    • Breech plug tuning
    • Firing Pin Tool
  • Ruger 77/50 Resources
  • Contact
  • About
  • Terms of Use
  • Austin & Halleck Inline
  • EULA